Home   Contact Us     Site Map    Privacy
About Us   |   All About Chemical   All About Mechanical    |   All About AgroIndustri   
Chemical Specialty Our Product

Ariasiatek Performance Chemicals was established since 1998, supported and raw materials supplied by VULCAN Performance Chemicals, Birmingham, USA and JLB Formula, USA. Ariasia Performance Chemicals services the chemical treatment in the Oilfield production, Boilers, Refinery treatment Chemicals, Cooling water treatment, Fertilizer, Pulp & Paper, Mining, and others Industries

Demulsifier

     There are several reasons why water is removed following production of crude oil. The Two most obvious are to avoid overloading and to reduce degradation of pipeline and storage. In the oilfield operation there has been complex and wide variety of oil and water emulsion. The type of emulsion is determined by the kind of emulsifiers,  temperature, the volume ratio of both liquid phases, the property of container walls and  so forth. There have been a lot of ariation system treatments and chemicals used to treat the oil and water emulsion at different oilfield operation. Ariasia Demulsifier is, bottle  tested, field tested, and special produced to the specific Field and area of the Oilfield  Production.

Water Clarifier

     Effluent water separated from the crude oil, have to meet environment standard Quality, fee or very small oil contents, before run in to the river, sea or jungle. Like Demulsifier, in the oilfield operation, specific water clarifier will treat the certain Field or area, and others type of products will treat different field. Ariasia Water Clarifier is, bottle tested, field tested, and special produced to the Specific field and area of the oilfield Production

Scale Inhibitor

      Oilfield waters are complex and diverse. Water is always in the process of dissolving or depositing solids. Whenever the concentration of an ion or compound exceeds its solubility in water or whenever two incompatible waters are mixed solids deposition Occurs. In most Instances these solids are referred to as scales. There are many types of scale deposits. They vary in their difficulty of removal. As Important as the selection of the scale inhibitor is the method of application. The scale Inhibitor treatment includes scale squeeze treatment, continuous injection treatment And batch treatment

Corrosion Inhibitor

      Corrosion has been defined as the destruction of the metal by chemicals or electro chemicals reaction of the metal with its environment. Corrosion can drastically increase the expense of crude oil exploration, production transportation and refining. Corrosion typically occurs in the equipment utilized in the producing wells, flowlines, Vessels, tanks, pumps, etc. Surfactant technology is commonly utilized to mitigate and Prevent corrosion, especially that caused by corrosive gases such as oxygen, carbon Dioxide and hydrogen sulfide. Corrosion inhibitors are applied in periodic batch or Slug treatments,or continuously.

Oxygen Scavenger

      The presence of dissolve oxygen in water is greatly increase its corrosivity and interferes Interferes with the action of corrosion inhibitors. Boiler feed waters is frequently Degasified, because dissolved oxygen is particularly corrosive at high temperatures. Oxygen plays an equally important role in creating problems of  deposits and injection Well plugging. Some water flood waters are degasified to decrease corrosion and Prevent the formation of corrosion products that might plug the injection well.

H2S Scavenger

     Hydrogen Sulfide in the oilfield and gas operations system must be eliminated or Reduced to a very levels, as Hidrogen Sulfide is extremely toxic, corrosive and Has an inconvenient odor. Ariasia H2S Scavenger is completely removes or reduces the Hydrogen Sulfide concentration in the system, depend on the dosages rate, H2S Concentration and complexity of the system.

Biocide

     The microbial growth, particularly Sulfate Reducing bacteria (SRB`s), can give rise To sulfides as products of their metabolism. They also cause problems due to the Biomass generated, which will act as a binder with other solids in the system to cause Deposit problems. The result is accelerated corrosion under the deposits, formation Plugging, and others side effects. Ariasia Biocide is effective in controlling Sulfate Reducing Bacteria, specially designed for use in the Oilfield operations, and it is Environmental friendly product.

Foamer

      Foaming is the one of the most characteristic phenomena of surfactant solutions. While foaming does not occur in the pure products, it some time occurs in the Aqueous solution in  with surfactants or polymers are dissolved. In the industries the foam Are desirable because of their functionality, such as the deinking of waste paper, the Floatation of minerals, air entraining agents for concrete or urethane resin, fire fighting Foams, shampoo, tooth paste, and shaving cream.

Defoamer

     Foaming is a characteristic property of surfactants or natural surface active substances can be prevented by the use of antifoaming agents. Ariasia Defoamer (supplied in the oil Base or water base, depend on the system required) works effectively in very low Concentration to prevent foaming in an aqueous system. Ariasia Defoamer can be Used in a variety of industrial applications including wide range temperature and Extreme pH conditions.

Cleaner

     Detergents are formulated by using components called builders together with Surfactants. The overall action of each component is necessary for cleaning. In a Detergent Formulation, surfactants contribute to the functions of adsorptions, the Decrease in surface tension, wetting, emulsification, and dispersion. Cleaning at first Begins with the wetting of the substates ( clothes, kitchenware, metals, etc ) with the Cleaning solution. Ariasia has oil base and water base Cleaner, depend on necessity, Ariasia Cleaners are biodegradable and environment friendly Cleaners.

Oil Spill Dispersant

     Ariasia Oil Spill Dispersant is designed to disperse crude oil spills and slicks in marine environments. The Chemicals penetrate rapidly through an oil spills and oil layer, reduces interfacial tension between crude oil and sea water , break up the oil film into small dispersed droplets.

Pour Point Depressant

      Pipeline transportation of  crude oil is one of the most convenient and economical Means. However, when Crude oil with high wax content is cooled below its pour Point, the wax precipitates and can cause reducing the flow rate or even plugging the Pipeline. The viscosity of  waxy crude oils increase as these crudes cool below their Cloud points, posing serious problems in their transportation. Waxy constituents in Crude oils are mainly straight chain or paraffinic hydrocarbons with carbon chain Lengths between C20 and C75. When the crude is cooled, these paraffinic Hydrocarbons crystallize. Wax crystal modifiers are the economical solution to the Wax deposition problem.

Boiler Water Treatment

      Boiler feed water treatment is classified as external or internal treatment. External Treatment means that the water composition is altered before it enters the boiler. Typical external treatment process include softening, demineralization, deaeration, Iron and manganese removal, filtration, or some combination. Internal treatment Refers to chemicals added to the water, which react inside the boiler to prevent scale, Corrosion, or foaming.

Desalter Aid Chemicals

     The function of desalting in the refinery operations is to remove impurities which are Present in crude oil so that they will not cause interference in the subsequent Processing steps such as corrosion, fouling or, in certain cases, poisoning of catalysts In certain process operations. The major portions of these impurities are the mineral Salts s\dissolved in the water contained in the crude oil.

Metal Passivator

     Nickel, Vanadium, Copper, Iron, and Sodium are common in Fluid Catalytic Cracking Unit charge stock. These are contaminant that reduce FCC catalyst activity Metal Passivators are used on FCC Unit to complex with or passivate heavy metals On the catalyst. FCC Metal Passivator stable, aqueous dispersion suitable for use For metals passivation on FCCU catalyst.

Antifoulants

     Fouling is caused by deposits formed on any water wetted surface which interfere with the efficient operation of the process, such as : scale, sludge, rust, slime and sand. Fouling at the piping system can dramatically reduce heat transfer efficiency reduce flow rate capacity and contribute to under deposit corrosion.

 

Telp  : (062) 21 889 567 02
Fax   : (062) 21 889 561 52

Email: sales@ariasiatek.co.id

Ruko Bumi Satria Kencana
Blok A4 Jl. KH. Noer Ali
Bekasi 17144


             
Copyright © 2011 Ariasiatek Indonesia  All Rights Reserved